SMV Series - Shape Memory Alloy Diaphragm Isolation Valve - Low Cost
Orifice diameter 0.4 - 0.8mm
Description
2/2-way shape memory alloy diaphragm isolation valve with fluid separation.
By using a Shape Memory Alloy instead of a magnet, the switching process is almost silent and requires only a very low power of 0.3 W. This technology makes the switching process significantly slower compared to solenoid valves, which means that the valves are especially suitable for applications that need to react sensitively to fast flow movements.
The compact design of only 4.0 x 19.0 x 18.4 mm and the flange connection enable extremely compact integration in microfluidic systems.
We can offer this valve as a low-cost valve.
Specifications
Type
|
2/2-way normally closed
|
Orifice diameter
|
0.4 mm | 0.8 mm
|
Port Connection
|
hose barbs | flange
|
Operating current
|
250 mA (please note the note) |
Operating pressure range
|
Input: 0 - 1000 mbar | 0 - 2000 mbar | 0 - 2500 mbar Output: 0 - 500 mbar | 0 - 1000 mbar |
Diaphragm material
|
FPM | EPDM | FFKM (other materials on request)
|
Body material
|
PPS | PEEK (other materials on request)
|
Fluid temperature range
|
5 - 40°C
|
Ambient temperature range
|
5 - 40°C
|
Power consumption
|
0.3 W
|
Switching time
|
600 ms
|
Operating mode
|
max. 0.6 Hz
|
Mounting direction
|
Any
|
Fluid resistance
|
neutral and aggressive liquids / gases (see resistance lists) |
Dimensions
|
4.0 x 18.4 x 19.0 mm
|
Weight
|
approx. 1g
|
Power supply precautions
- Constant power supply recommended.
- Operation with 12 VDC power supply or batteries is possible. It is important to insert a resistor between the valve and the power source. (See diagram on the right.)
- Failures in operation so may result in damage to the Shape Memory Alloy.
Downloads
SMV Series Datasheet 217 KB